News Center

Practical technology sharing |Alocter 5G / 4G industrial router and Huawei USG6300 build IPSEC VPN

Release time:2020-04-27 15:58:00Click:

Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN



Huawei USG6300 IPSEC parameter configuration



1. Log in to the Huawei router configuration interface and click "Network" "IPSEC" "New".


Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN


2. After new creation, configure as shown below


Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN


Add a data stream (bound subnet), each client corresponds to a data stream, the following figure is an example: the subnet of the client is 172.15.50.0/24 and the subnet of the server is 10.1.2.0/24. After adding, the subnet client of 172.15.50.0/24 can connect normally.


Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN


The following figure shows the parameters of the first phase of IPSEC encryption. The corresponding client routers need to be configured with the same parameters.


Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN


The figure below shows the parameters of the second stage of IPSEC encryption.


Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN



Alocter router IPSEC configuration


Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN


Alocter 5G / 4G router will display "established" status after successful connection


Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN


The server will show 172.15.50.0/24 this link is successfully connected


Alocter 5G / 4G industrial router, Huawei USG6300, IPSEC VPN